Licensed & insured · Pearland, TX

    Custom Metal Fabrication for Fences, Decks, Railings & Gates in Pearland, TX in Pearland, TX built by Forged Fence & Deck

    Licensed · Insured · Pearland, TX

    Custom Metal Fabrication for Fences, Decks, Railings & Gates in Pearland, TX

    Precision custom metalwork for fences, gates, decks & railings — serving Pearland, Manvel, Friendswood, Sugar Land & Houston.

    5.0 · 25 Google reviewsWorkmanship warranty in writing
    (281) 628-9551
    Licensed & Insured Built for Gulf Coast Conditions Written, Itemized Scope

    Note: Forged Fence & Deck is a fence, deck, pergola and patio cover builder first. We don't run a walk-in shop or take standalone shop work — the custom welding below is done in-house by our own crew for the fences, gates, railings and structures we design and install for you.

    Custom Metal Fabrication for Fences, Decks, Railings & Gates welded by the Forged Fence & Deck crew in Pearland, Texas
    PEARLAND, TX · IN-HOUSE CUSTOM WELDING

    Custom welding by our own crew

    Custom Metal Fabrication for Fences, Decks, Railings & Gates in Pearland & Greater Houston

    Need custom metal fabrication for fences, decks, railings & gates in Pearland, Manvel, Friendswood, Alvin or Houston? When a fence, gate, railing or structure calls for metalwork, our crew cuts, welds and finishes it themselves instead of ordering a stock panel that almost fits. Square frames, clean welds, and coatings that survive Gulf Coast humidity.

    Our custom welding by our own crew handles fence fabrication, gate fabrication, deck railing fabrication, enclosure fabrication, and every type of custom metalwork. We specialize in fabricating custom welded fences, fabricating custom metal gates, fabricating deck railings, and fabricating metal enclosures for residential and commercial properties. Whether you need iron fence fabrication, steel gate fabrication, aluminum railing fabrication, or custom welded fence panels — every piece is fabricated to exact specifications with professional welding, grinding, and finishing.

    • In-house fence fabrication & gate fabrication
    • Fabricating custom welded fences & fence panels
    • Custom gate fabrication — iron, steel & aluminum
    • Deck railing fabrication & stair railing fabrication
    • Enclosure fabrication — patio, pool & property
    • Fabricating custom metal gates with automation
    • Powder coating & finishing on all fabricated pieces
    • Free on-site consultation & fabrication estimates

    Straight off the welding table

    Real Custom Welding by Our Own Crew

    Gates, panels and frames we cut, welded and finished in-house before install — no stock panels, no stock photos.

    Arched steel driveway gate panel welded in-house by the Forged Fence & Deck crew for a Pearland, TX propertyArched Drive Gate
    Spear-top iron driveway gate panel fabricated by our own crew before finishing — Pearland, TXSpear-Top Panel
    Pair of galvanized double drive gates with ornamental scrollwork tops built for a Pearland, TX drivewayScrollwork Double Gate
    Galvanized walk gate with hand-formed ornamental scrollwork detail — custom welded in Pearland, TXOrnamental Walk Gate
    Galvanized scroll-top iron fence panel ready for install on a Pearland, TX propertyScroll-Top Fence Panel
    Welded galvanized steel walk gate frame with square pickets built by Forged Fence & Deck in Pearland, TXSteel Gate Frame
    Custom gate fabrication in progress — welded in-house by the Forged Fence & Deck crew for a Pearland, TX install.
    Custom welded metalwork by Forged Fence & Deck in Pearland, TX
    PEARLAND, TX · CUSTOM WELDING

    Why choose us

    Why Our Custom Metal Fabrication for Fences, Decks, Railings & Gates Is Fitted Before Installation

    Custom metalwork is measured for the property, cut and fitted accurately, welded by our own crew, then finished and securely mounted for Gulf Coast exposure.

    Licensed & Insured

    Full liability coverage and workers' compensation on every custom metal fabrication for fences, decks, railings & gates project.

    Measured for the Opening

    Field dimensions, slopes, attachment points and clearances are verified before material is cut.

    The Right Weld Process

    MIG, TIG or stick welding is selected for the metal, thickness, finish and installation conditions.

    Jigged, Fitted & Square

    Frames and assemblies are checked for fit, level and alignment before final welding and installation.

    Protected from Corrosion

    Surface preparation, galvanizing, primer or powder coating is matched to the metal and exposure.

    Workmanship Guarantee

    We inspect the finished work with you. If something isn't right, we come back and make it right.

    (281) 628-9551

    How we build

    The Forged Process

    Four steps from first call to finished fence, deck or pergola — same crew, same price you signed, no surprises in the middle.

    24hr

    Estimate

    1–3

    Build days

    0

    Hidden fees

    (281) 628-9551
    1. Design Consultation

      We look at the project on site, talk through how the custom metal fabrication for fences, decks, railings & gates has to work, and match the metalwork to the fence, deck or structure it belongs to.

    2. Measure & Spec

      Openings, spans, post sizes and load are measured and specced before a single piece of steel gets cut.

    3. Welded By Our Crew

      TIG, MIG and stick welding done by our own crew for the projects we build — frames squared, welds ground clean.

    4. Finish & Install

      Galvanized or powder coated for Gulf Coast weather, then set, hung and dialed in at your property.

    Google reviews

    What Pearland Homeowners Say About Us

    5.027 reviews on Google
    “My 25 yo cedar fence was partially destroyed by Hurricane Beryl so I decided to replace the entire section of fence. I contacted several fence companies but only Kyle at 360Fence & Deck responded quickly with a willingness to measure the section and provide an estimate within the next 2 days. The estimate was lower than previous quotes and I was impressed with Kyle's customer service. They completed the job within 3 days and I am very satisfied with the results. I was very grateful they built the new fence without harming existing landscaping growing on the old fence. Clearly these guys are excellent craftsmen with the appearance and quality adhering to very high standards. Kyle was very helpful in answering my questions and concerns. I would definitely use 360Fence & Deck co for future work and I strongly recommend them to others.”
    Craig SherlinPearland, TX
    “Hands down the best in Pearland. They built a deck around my hot tub and even lit it up with deck lights. Fast well priced and professional. Five stars ⭐️ ⭐️ ⭐️ ⭐️ ⭐️”
    Contact UsPearland, TX
    “Kyle and his team did a fantastic job on my mother in laws fence. He followed through on everything he promised and wrapped everything up in a timely manner. 5 stars was the highest rating allowed here, they deserved 10. Highly recommend these guys!!!!! You won’t be disappointed.”
    Kenneth DavidsonPearland, TX
    “Kyle and his team do great work! Great to work with. Great value.”
    Rebecca ThompsonPearland, TX
    “They were reasonably priced and were able to finish the job on short notice.”
    preston5100Pearland, TX

    On the job

    Recent Custom Metal Fabrication for Fences, Decks, Railings & Gates Work In & Near Pearland

    Real custom metal fabrication for fences, decks, railings & gates jobs, photographed by our own crew. Each published photo keeps its actual service and job-area details.

    Modern Laser-Cut Steel Walkway Gate
    Ornate Wrought Iron Arched Driveway Gate
    Welding Iron Fence
    Welding Wrought Iron Gate
    Custom Welding project from the Forged Fence & Deck Greater Houston portfolio
    Decorative Welding project from the Forged Fence & Deck Greater Houston portfolio

    SERVICE AREA MAP

    Custom Metal Fabrication for Fences, Decks, Railings & Gates Across the Houston Metro

    We handle custom metal fabrication throughout Brazoria, Harris, Galveston and Fort Bend counties. Tap your city on the map for local pricing, soil and HOA requirements, and completed work nearby.

    PEARLAND HQ

    STEP 1 — PICK YOUR CITY

    Tap a house for custom metal fabrication for fences, decks, railings & gates in your area

    We run custom metal fabrication for fences, decks, railings & gates crews out of Pearland across 23 cities. Pick a marker below and we'll show every service we offer there.

    CITIES WE COVER

    (281) 628-9551

    Answers

    Custom Metal Fabrication for Fences, Decks, Railings & Gates — Frequently Asked Questions

    What types of custom metal fabrication do you offer?

    We offer fence fabrication, gate fabrication, deck railing fabrication, stair railing fabrication, enclosure fabrication, and decorative metalwork fabrication. We specialize in fabricating custom welded fences, fabricating custom metal gates, and fabricating metal deck railings.

    Can you fabricate a custom welded fence for my property?

    Yes, fabricating custom welded fences is one of our core services. We fabricate custom welded iron fences, steel fences, aluminum fences, and ornamental metal fences to your exact design specifications.

    Do you offer custom gate fabrication?

    Absolutely. Our gate fabrication services include driveway gate fabrication, pedestrian gate fabrication, sliding gate fabrication, and swing gate fabrication in iron, steel, and aluminum.

    Can you fabricate from my own design?

    Yes — bring us your sketches or drawings for fence fabrication, gate fabrication, railing fabrication, or any custom metalwork, and we'll fabricate your vision in metal.

    Get a free custom metal fabrication for fences, decks, railings & gates estimate

    Call now for a real appointment window, written pricing, and custom welding handled by the same crew that installs it.

    (281) 628-9551